AQVA ONE countertop filter for municipal tap water

The product is no longer available in our selection. Please find the new replacement product AQ002-2 here.

AQVA ONE countertop filter is a convenient tap-connected drinking water purifier that filters the most common impurities in municipal water and makes the water fresh and tasty. Easy to install.

• Water can be taken either unfiltered or filtered. Straight from the tap, it comes unfiltered, for example, as dishwater. By turning the switch, it is filtered into fresh drinking water.
• Installation takes a few minutes.
• Filters the water not only from the most common impurities and odor and taste problems, but also from microbiological impurities that are otherwise difficult to remove, such as bacteria, yeasts, molds, protozoa and parasites. The hygiene of the water rises to a whole new level.
• Suitable even for a larger family thanks to the efficient and sufficient filter.
• Because the product has no wearing parts with sliding surfaces, it has superior wear and use resistance. The valve mechanism is designed to withstand thousands of uses without leaks or other problems.
• Stainless steel has been tested as a hygienic and durable material that does not dissolve compounds that do not belong to it in water.

NOTE! Recommended for use in improving the quality of municipal water. For well or lake water only as a quality improver or recommended by an expert based on water analysis. The AQVA DUO table filter (with product code: AQ008-R2) is usually more suitable for well water.

How it works

1. Large debris and sediments coming off the pipeline are filtered out of the water.
2. The activated carbon of the adsorption filter binds water impurities.
3. Ultrafiltration removes bacteria, yeasts, protozoa and molds with an accuracy of 0.1 micrometer.

Filter from water

• chlorine and chloramine
• pesticides
• heavy metals such as copper, lead, mercury and cadmium
• lime
• iron and rust
• bacteria, viruses, yeasts and molds
• microplastics
• antibiotic and hormone residues
• petrochemicals
• phenols
• solids down to 0.1 µm (0.0001 millimeter)

Filter replacement interval

• The capacity of the filter is up to four thousand liters, depending on the quality of the water. If there is a lot of rust, iron, humus, microbiological impurities or lime in the water to be cleaned, the capacity may be less than four thousand liters.
• The need to change the filter caused by clogging can be noticed as the flow of purified water slows down.
• Replacement interval about 12 months. / 1-4 users.
• The filter is easy to change. The change is made using the included case key.
• Replacement filter product code: AQUF01-M

Installation

The product is connected to the faucet head directly to the threads of the bubbler or with the supplied thread adapter.

If your tap has special threads, measure the diameter of the tap aerator, and choose the right special metal adapter from the list below.

 You can order suitable special metal adapters from our online store:

• AQ080 converts threads from 18.5mm to 22mm
• AQ081 converts short 22mm threads to longer 22mm threads. This extension piece is for taps where the aerator nozzle attaches to the tap spout with inner threads.
• AQ082 converts threads from 24 mm to 22 mm

• For Oras "La Cucina Alessi", Optima, Cubista and IKEA taps, Special adapter 18.5 mm -> 22 mm must be purchased separately. Product code: AQ080
• For Oras taps with a 24 mm aerator nozzle (with external threads), a special adapter for 24 mm -> 22 mm is suitable. Product code: AQ082
• Oras Safira 1030, Oras Safira 1035S, Oras 1825FG and Oras Care taps require a special adapter. Product code: AQ082