AQVA 0,1µm ultra filtration 10 inch / M-size

Ultrafiltration Cartridge for Aqva M-Size Filter Housing

The ultrafiltration cartridge is designed for Aqva’s M-sized filter housing. It effectively reduces organic matter and microbes from household water by filtering particles larger than 0.1 µm. Ideal for clarifying cottage water, lake water, and well water, it supports one water point. For drinking water purification, especially if microbiological contaminants are present, a reverse osmosis system, such as the Aqva Saimaa reverse osmosis unit, is recommended.

Benefits:

• Enhances household water quality for cleaner, safer results
• Easy maintenance for user convenience
• No drainage system required, simplifying installation

Filters:

• Bacteria, yeasts, molds, cysts
• Odors and unpleasant tastes
• Blue-green algae (cyanobacteria)**
• Organic matter
• Clay
• Sediments
• Sand
• Solid particles

Pollen **Filters blue-green algae blooms. Toxins released by blue-green algae into the water can be removed using a reverse osmosis system, such as the Aqva Saimaa reverse osmosis unit.

Filter Replacement:

• Replace the filter when water flow decreases or output pressure drops close to zero, indicating clogging. For optimal performance, replace promptly.
• Model: AQUF01-M, capacity approximately 3,000–14,000 liters*
• Filter lifespan depends on raw water quality.
• If you notice changes in purified water quality, we recommend conducting a follow-up water analysis of the raw water.

Technical Specifications:

• Typical flow rate: Up to 5 liters per minute
• Pressure drop: 0.3 bar at 10 liters per minute
• Compatible with M-sized Aqva filter housing (10” standard size)

System Requirements:

• Pre-filtration unit: Incoming water must be pre-filtered, e.g., with AQMF1-M fine filter
• Consistent feed pressure: 2–6 bar

Winter Storage:

• During winter, if temperatures drop below 2°C, shut off water lines and drain filter housings to prevent frost damage.