AQVA SAIMAA 2 EASY Reverse Osmosis Purifier

UPDATED reverse osmosis system, manufactured in Finland, for producing drinking and cooking water without a storage tank – direct flow system. Designed for purifying well water, municipal water and lake water. 

AQVA SAIMAA 2 EASY is also an excellent choice for filtering drinking water in restaurant and cafes.

Benefits:

• The device first removes impurities from the water that are known to impair the taste of beverages and food or may be harmful to health. Only water molecules pass through the filter, while impurities are flushed into the drain. Finally, just before the water exits the tap, it is alkalized using a post-mineralization filter containing high-quality Finnish calcium. Water is dispensed through the included high-quality stainless steel tap.
• Can be connected directly to the feedwater lines of commercial kitchen appliances and equipment. In such setups, it may be necessary to add a pressurized water reservoir to the feed line if the total water flow demand of the devices is high.
• The system operates without electricity or fault-prone automation, relying solely on mains water pressure. Its reliability is based on a unique valve solution and standard-compatible reverse osmosis membranes that perform the actual purification.
• Flow rate meters allow users to monitor the system’s performance and assess when the RO membranes need replacement. A pressure gauge indicates when the pre-filter should be changed.
• In household use, filters are typically replaced once a year, even with low-quality source water. For professional use, it is recommended to replace the reverse osmosis membranes every six months or when the water production rate slows down.

Features:

• Reverse osmosis unit developed and manufactured in Finland
• Expandable into a larger system if needed, for example by connecting to a separate water tank
• Nearly maintenance-free – only periodic filter changes, easily done by the user
• Compact and lightweight unit connected with tool-free push/pull fittings
• Only one mechanical moving part: the automatic valve
• Operates using mains water pressure
• The higher the pressure, the higher the clean water output
• At 4 bar pressure: approx. 1 liter per minute; at 5 bar: approx. 1.5 liters per minute. Water impurity levels – especially salinity (chloride) – affect the flow rate
• Adjustable rinse water volume – helps conserve water and control clean water production rate
• Removes most common water contaminants (except some gaseous ones), removal efficiency: 85–99.9999 %
• Suitable for purification of lake, river, well, and municipal waters
• Can purify slightly saline waters if TDS (Total Dissolved Solids) is below 2500 mg/l
• Used to produce water into a non-pressurized container, directly to a separate tap, or into a bladder pressure tank
• Product dimensions: Width 440 mm, Depth 150 mm, Height 420 mm

Filters:

• Bacteria, viruses, cysts, yeasts, and molds
• Manganese
• Sulfur, hydrogen sulfide
• Iron
• Uranium
• Organic matter (COD, KMn04, permanganate)

• Fluoride
• Chloride and salt – approx. 85 % removal
• Odors and taste disturbances
• Lime scale
• Softens water
• Hormone, antibiotic, and pharmaceutical residues
• Pollutants
• Color
• Agricultural and industrial residues
• Arsenic

Contents:

• TOM pure water tap made of stainless steel (AQ007-1)
• Reverse osmosis unit
• 2 × RO membranes
• Pre-filter and post-mineralization filter
• 5 meters of feedwater tubing + 5 meters of tubing for tap and drain water
• Feedwater connector and shut-off valve, ½” male–female thread
• Drain connector / saddle clamp for rinse water
• Housing wrench

Replacement filters:

• Pre-filter: AQCB-M, replaced approx one a year.*
• Post-mineralization: AQ006-PM, replaced approx once a year.*
• Two reverse osmosis membranes: AQ061-600, replaced appros every two years.*

*Raw water quality and device usage rate affect the actual replacement interval of the filters.

Cold storage:

• When temperatures drop below 2 °C the water network should be closed, and in-line filter housings and water vessels are emptied to prevent frost damage.