AQVA M-Size Filter System for Water Purification
The AQVA M-size filter system is designed for effective water purification, targeting humus, bacteria, iron, and manganese. This advanced filtration solution ensures clean, safe water for your home or property, making it ideal for households seeking reliable water treatment.
Filtration Process
- First Stage: Sediment Filtration
A 1 µm (1/1000th of a millimeter) fine filter removes both visible and invisible suspended solids, ensuring crystal-clear water. This stage also reduces approximately 30% of dissolved humus, enhancing water quality.
- Second Stage: AQVA MAX Filter
The AQVA MAX filter, utilizing high-surface-area ion-exchange fiber technology, primarily targets humus while also reducing iron and manganese. This stage delivers superior water purification, tackling common impurities effectively.
- Final Stage: Ultrafiltration
The AQUF01-M ultrafilter, with a 0.1 µm pore size, eliminates bacteria, yeast, mold, and residual suspended solids and humus. This ensures your water is safe and clean, meeting high standards for drinking water quality.
Technical Specifications
- Filter Housing: AQVA M-size, 10" housing
- Connections: 3/4" brass-reinforced internal fittings
- No Electricity Required: Energy-efficient design
- No Drainage Needed: Hassle-free operation
- Easy Installation and Use: Includes housing wrench for simple maintenance
- Installation Location: Typically installed after a pressure water tank, before household water distribution
- Dimensions: H400 x W370 x D150 mm
- Operating Temperature: 2–30°C
Filtration Performance
- Typical Flow Rate: Up to 4 liters per minute, suitable for a single water point. Higher flow rates are possible, but filtration efficiency may temporarily decrease.
- Pressure Drop: 0.5–1.0 bar at a flow rate of 4 liters per minute, depending on filter usage.
- Operating Pressure: 2–10 bar. For higher pressures, a pressure reduction valve can be installed.
- Maximum Iron Content: Up to 5 mg/L (4000 µg/L), recommended limit 2 mg/L.
- Maximum Manganese Content: Recommended limit 300 µg/L.
- Maximum Humus Content: COD 10 mg/L (40 mg/L KMnO4). The system can handle higher humus levels, but ultrafilter clogging may occur faster.
- Additional Protection: For water containing fecal bacteria, we recommend a compact reverse osmosis unit (e.g., under-sink model) for drinking water as a precautionary measure due to the theoretical risk of mechanical failure.
Replacement Filters and Estimated Lifespan
- Product Code: AQMF1-M – 1 µm fine filter, approximately 12,000 liters.*
- Product Code: AQ050X – AQVA MAX filter, approximately 15,000 liters at COD 5 mg/L humus content.*
- Product Code: AQUF01-M – Ultrafilter, approximately 3,000–14,000 liters.*
*Filter lifespan and performance may vary based on overall water quality and seasonal fluctuations.