AQVA TDS / Temperature meter

AQVA TDS-Meter

An easy-to-use digital TDS and temperature meter designed for monitoring general water quality

Benefits

• The TDS meter measures the Total Dissolved Solids (TDS) in water, indicating the amount of dissolved substances such as salts, minerals, and metals.

• Measurement range: 0–9990 ppm (parts per million = mg/l).

• For measurements between 0–999 ppm, results are provided with an accuracy of 1 ppm. For TDS values between 1000–9990 ppm, results are provided with an accuracy of 10 ppm.

Technical Specifications

• Measurement range: 0–9990 ppm (parts per million = mg/l).

• Accuracy: 1 ppm for 0–999 ppm range; 10 ppm for 1000–9990 ppm range.

• Refer to the product manual available under the "Files" tab.

*The meter is not intended for precise analytical measurements but for observing changes in water or filtration systems. The displayed TDS value may not match that of another similar meter, but the repeatability of measurements is reliable. The meter allows you to reliably determine the baseline water quality and detect any subsequent changes in water quality.

Using the TDS Meter

1. Remove the protective cap.

2. Turn the meter on using the ON/OFF button.

3. Submerge the meter in water to a depth of about 2–3 cm, up to the middle of the striped section.

4. Wait for the reading to stabilize (3–5 seconds), then press the HOLD button to save the measured value.

5. After use, dry the meter’s sensors with soft paper (e.g., a tissue).