AQVA TDS, conductivity and temperature meter

AQVA TDS meter

An easy-to-use digital TDS, conductivity and temperature meter that can be used to monitor overall water quality.

Benefits

• A TDS meter indicates the TDS value (Total Dissolved Solids) of the water, i.e. the amount of solids dissolved in the water, including salts, minerals and metals.

• Measuring range 0—9990 ppm (parts per million = mg/l)

• When the measurement range is 0–999 ppm, the measurement result is obtained with an accuracy of one ppm. If the TDS value is between 1000–9990 ppm, the measurement result is obtained with an accuracy of 10 ppm.

Technical features

• Measuring range 0—9990 ppm (parts per million = mg/l)

• When the measurement range is 0–999 ppm, the measurement result is obtained with an accuracy of one ppm. If the TDS value is between 1000–9990 ppm, the measurement result is obtained with an accuracy of 10 ppm.
• Check out the product manual, which can be found in the "Files" tab.

Using a TDS meter

1. Remove the protective cap.
2. Turn on the meter using the ON/OFF button.
3. Place the meter in the water to a depth of about 2–3 cm, halfway between the striped part.
4. Wait for the reading on the display to stabilize (3–5 seconds), then press the HOLD button to save the measured reading.
5. After use, dry the meter sensors from water with soft paper (e.g. a tissue).