AQVA L / 10" BB filter combination - iron, manganese

Double Iron-Manganese Filter package

Benefits:

• Improves drinking-water quality
• Easy maintenance
• No drain line required
• Pressure relase button
• Standard 10" Big Blue size
• Simple to install and use
• No electricity needed

Purification methods:

• 1 µm pre-filter (AQMF1-L). Mechanically filters particles and sediment down to 1 µm (1/1000 mm). Filters 30 % of organic matter on average.
• Iron-Manganese filter (AQFE-L). Binds iron & manganese and raises pH by ~0.8 units (depending on incoming water).
• Aqva Iron final filter (AQ051). Filters out remaining iron, manganese and any residual organic matter.

Filters:

• Iron
• Manganese
• Heavy metals (lead, copper, etc.)
• Suspended solids down to 1 µm
• Organic matter (colour & odour)
• Limescale

Theoretical capacity in m³ of water:

• (iron + manganese + humus COD combined)
• 1 mg/l (1000 µg/l) ? 300 m³
• 5 mg/l (5000 µg/l) ? 60 m³
• 10 mg/l (10 000 µg/l) ? 30 m³

Package contents:

• 3 filter housings
• 1" BSP brass nipples for series connection
• Shut-off ball valves with ¼" sampling ports (1/4" pressure gauge AQ-PG15-14 sold separately)
• Housing wrench
• Wall-mount bracket
• All three cartridges

Technical specifications:

• Connections: 1" female BSP
• Dimensions: 400 mm H × 700 mm W × 200 mm D
• Dry weight: 7 kg
• Full manual under the “Files” tab

System requirements:

• Steady inlet pressure 2–10 bar
• Install after the pressure tank
• Water temperature 2–30 °C
• Max iron 6 mg/l (recommended ? 4 mg/l)
• Max manganese 0.9 mg/l (recommended ? 0.45 mg/l)
• Max organic matter 15 mg/l COD (recommended < 10 mg/l)
• Recommended flow at max contamination: 8 L/min (1–2 taps open)
• Higher flows possible, but pressure drop increases
• Typical pressure drop at 8 liter per minute flow rate approx 0,8 bar. 

Winter storage: 

• During winter, if temperatures drop below 2°C, to prevent frost damage, water lines should be shut off, and the filter housings drained.