PREMIX COMFORT 55 group thermostatic mixer M3 3/4 inch 55L/pm

PREMIX COMFORT 
Ref. 731002

• Group thermostatic mixing valve for mixed water distribution from 32° to 42°C
• Anti-scalding safety.
• Regulation of temperature variations.
• Non-return valves and filters accessible from the exterior without having to remove the mechanism.
• Thermal cartridge with no specific lever needed (push-button on the control knob).
• Interchangeable cartridge with automotive cell.
• High-resistance chrome-plated brass body DZR.
• Maximum hot water temperature: 85°C.
• Differential hot water / mixed water: 15°C mini.
• Pressure differences at the entrance: 1 bar maximum (0.5 bar recommended).
• Minimum pressure / maximum: 1 to 10 bar (1 to 5 bar recommended).
• Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring).
• Mixed water outlet at the top (purple ring).
• For bottom outlet: unscrew / place lid at the top and outlet connector at the bottom.
• 15% energy savings: optimised heat loss (comparison between a circulating loop at 55°C and a non-circulating system at 70°C).
• Safety and prolongation of system life span (Hot water at > 65°C leads to premature aging within the system).
• Maximum temperature limiter, can be adjusted by the installer.
• Reduced risk of scalding by limiting temperature at the point-of-use.
• 55 lpm - M3/4".

Advantages

•  Hot water shut-off if cold water fails.
•  Temperature stability.
•  Accessible non return valves and filters.
•  Automotive thermo-reactive cell.